Step1. To perform an auto scan,
Choose the vehicle manufacturer and then follow the instruction on each screen that appears to find the Auto Scan function from the list.
Step2. The following screens may shows,
Click OK to continue and the Auto Scan screen shows. The progress bar displays and indicates the progress of the scanning. The list of items below is the report of the test result for the ECU being tested. indicates the Trouble Codes in your vehicle. Indicates no fault found in the ECU and indicates the ECU items which is being tested.
Note: Those which (control units) cannot be found in the ECU will not stay in the summary report.
Step3. Do one of the followings to check the fault, or click the Esc button to exit and enter to the Function menu (Refer to Function Menu on Page 24).
Option 1:
1. Press the Pause button to view the fault without completing the test.
2. Highlight the fault you wish to view and then click OK button.
Option 2:
1. Wait until the scanning process complete.
2. Highlight the fault and then click OK.
Notice the followings about the Auto Scan Report screen,
To see the trouble codes,
1. Click the Display DTC button.
2. High the items (You wish to see) and click Help to view the details.
3. Click Esc to exit.
Step4. The screen below shows and indicates the communication process, wait until complete.
Step5. One of the following screens show once the communication process complete.
Possible 1: The screen below display a report of the test result.
1. Click OK Button
2. And then the Function Menu shows. Refer to the Function Menu in this Chapter on Page… for the possible options for the test function.
Possible 2: The following screen indicates no DTC found during the scanning process.
Refer to … on Page to check the connection between the scan tool and ECU.
Click Esc to exit the Auto Scan screen or click Save to save the current screen.
Related product:http://www.eobd2.fr/search/?q=Autel+MaxiDAS+DS708
留言列表
