Usually, there are two kinds of situation of ABS brake system warning light, one is red and the other is yellow/orange. What is the problem of them and how to solve?
Red ABS brake systems warning light:
If it is red on your vehicle dash, it often means there is an immediate danger when the car is driven. In this case, an immediately repair is needed; set emergency brake, low brake system fluid reservoir, half malfunction of brake system; these all should be better checked.
How to fix a brake system warning lights? Five steps assist you solve the problem.
Step1: Change switch or readjust if switch is misadjusted or has shorted out; inspect the emergency brake lever or handle to check if it is applied.
Step2: brake pad replacement or rear brake shoe replacement if brake pad or shoes are worn down, low level brake fluid level.
Step3: inspection on brake system to see whether it is abrupt leak or lead out massive amount of fluid.
Check brake fluid moisture, if observed, replacement of brake fluid.
Step4: check metal brake line failure or not; if do, replace with new one but not to repair it.
Step5: after repairing well, warning red light still on often; better have it reset with OBD2 CODE READER like Autel AutoLink AL609.
Yellow/orange ABS brake warning light:
It is different from red ABS brake warning light. if it occurs yellow/orange brake system warning light is on, an obd2 code scanner should be used to retrieve trouble codes, which assist fix the system, such as replacement of a wheel speed sensor or main controller. And these codes can be reset or clear after troubles being get rid off.
All in all, that is ABS brake systems warning light: red and yellow/orange.
留言列表
